GoMix C2T Mosaic Fix and Grout 20kg bag

GoMix C2T Mosaic Fix and Grout - 2 in 1 BS EN 12004 C1 Mosaic Adhesive & Grout

BS EN 12004 C1 Certified
2 in 1 Mosaic Adhesive & Grout (one-step construction)
Polymer modified cement-based, slip resistant for mosaic tiling
Water resistant & efflorescence resistant, avoid staining and water penetration
Low shrinkage, prevent joint cracking for long-term use
Just add water, easy to mix & apply with good workability
Cost effective, save time/cost & reduce material wastage
Suitable for internal/external wall & floor mosaic installation

Applications for GoMix C2T Mosaic Fix and Grout

🪩 Internal & external paper-faced mosaic tile installation (walls/floors)
🧱 Bonding & grouting mosaics on concrete, plaster & ceramic tile substrates
🏊 Water-prone areas mosaic tiling (with water resistant performance)
🛋️ Residential mosaic decoration (kitchen, bathroom, balcony)
🏢 Commercial mosaic projects (malls, hotels, public areas)
✂️ Mosaic joint filling (up to 6mm wide joints)

One-step setting and grouting for mosaics, ideal for fast and efficient mosaic construction projects

Technical Specifications - GoMix C2T Mosaic Fix and Grout

Item Detailed Parameters
Classification BS EN 12004 Type C1
Type 2 in 1 Mosaic Adhesive & Grout
Physical Form Powder
Packaging 20kg sealed craft sacks
Mixing Ratio 20kg powder : 5L clean water (1:0.24)
Potlife Approx. 60 minutes @ 20°C
Open Time 15 minutes @ 20°C
Application Temperature +5°C to +40°C
Bed Thickness 3-6mm (up to 12mm in small isolated areas)
Joint Width Suitability Up to 6mm
Tensile Adhesion Strength ≥0.5 MPa (all test conditions); ≥1 MPa (6hrs early)
Compressive Strength ≥10 MPa
Flexural Strength >3 MPa
Coverage 5-7kg/m² @3mm bed
Shelf Life 12 months (unopened, dry/shade storage)

All data tested under standard 20°C conditions. For project-specific dosage advice, contact our technical team.

Mixing & Application Guidelines

Surface Preparation

Clean/dry surface (free of oil/grease/loose material); new concrete/render cured for 4 weeks; old concrete stripped of loose mortar/paint.

Mixing Steps

Add water to pot → mix with powder to even paste → stand 5-10mins → remix for better workability.

Application Method

Spread 2mm thick on substrate → butter mosaic sheet back (fill all joints) → press with wooden float (final bed 3mm thick) → peel paper after setting (wet paper thoroughly).

Curing & Traffic

Light foot traffic after 2-3hrs; full traffic after 12hrs (per site conditions); water resistant for long-term use.

Key Warnings:

  • • Do not use directly on gypsum plaster substrate without pretreatment
  • • Mosaics must be dry before fixing
  • • Do not apply at temperatures below 5°C or above 40°C

Why Choose GoMix C2T Mosaic Fix and Grout?

🎯

2 in 1 One-Step Construction

Adhesive + grout in one product, save construction time and cost

🛡️

Anti-Efflorescence & Waterproof

Avoid mosaic staining and water penetration, suitable for wet areas

📈

Low Shrinkage & Crack-Resistant

Ensure mosaic joints stay intact for long-term use

Easy to Use & Cost-Effective

Just add water, good workability, reduce material wastage

BS EN 12004 C1 Certified
2 in 1 Adhesive & Grout for Mosaics
Water & Efflorescence Resistant
12 Months Long Shelf Life
Professional Technical Support

GoMix specializes in mosaic & tile construction materials, all products comply with international industry standards.

Request a Quote for GoMix C2T Mosaic Fix and Grout

All your information is strictly confidential and only used for inquiry reply.