GoMix D1TE Tile Adhesive High Performance Professional Formula Tile Adhesive
Professional formula with super high bond strength for all tiles & stones
Resistant to intermittent water exposure, ideal for interior floors/walls/countertops
Zero slippage/sag, stable for vertical wall and horizontal floor tiling
Multi-substrate compatible (concrete, masonry, plywood, existing ceramic tile)
Freeze/thaw-stable down to -18°C, easy for low-temperature storage/transport
Nonflammable & nontoxic, safe for construction and on-site use
Long open time (45-50mins @23°C), sufficient for precise tile alignment
Applications for GoMix D1TE Tile Adhesive
Professional-grade adhesive designed for diverse interior tiling applications with superior bond strength
Interior Floor & Wall Tiling
(Residential/commercial projects)
Interior Countertop Tiling
(Kitchen, bathroom, office)
Bonding Tiles on Various Substrates
(Concrete, masonry, plaster & dry-area wallboard)
Ceramic & Stone Tile Fixing
(Ceramic, mosaic, quarry, porcelain & gauged stone tiles)
Tiling on Existing Surfaces
(Existing ceramic tile, resilient flooring & plastic laminates)
Plywood Substrate Tiling
(Exterior-grade plywood - dry interior areas only)
Note: Not for critical water exposure areas | Ideal for interior tiling with high bond strength requirements
Technical Specifications - GoMix D1TE Tile Adhesive
Professional-grade performance data tested under standard conditions
| Category | Item | Detailed Parameters |
|---|---|---|
| Basic Information | Color | White |
| Packaging | 1gallon/drum; 30kg/plastic drum | |
| Flammability | Nonflammable | |
| Toxicity | Nontoxic | |
| Specific Gravity | 1.4 g/cm³ | |
| Performance Parameters | Shear Strength | Exceeds ANSI A136.1, Type 1 |
| Freeze/Thaw-Stable | Down to -18°C (0°F) | |
| Slippage (Sag) | None | |
| Water Resistance | Resistant to intermittent water exposure | |
| Application Parameters | Open Time @23°C | 45 to 50 minutes |
| Drying Time @23°C | 24 to 48 hours | |
| Application Temp | 10°C - 38°C (50°F - 100°F) | |
| Shelf Life | 2 years (sealed, dry/room temp); 12 months (original packing) |
Coverage Reference
All data tested under standard 23°C conditions. For project-specific advice, contact our technical team.
Surface Preparation & Application Guidelines
1
Surface Preparation
All surfaces: Structurally sound, clean, dry; glossy/painted surfaces sanded & stripped
Cementitious surfaces: Fully cured, porous; smooth concrete mechanically abraded
Plywood/existing tiles: Plywood meets ANSI requirements; existing tiles/laminates abraded & cleaned
2
Application Steps
Spread adhesive → comb with notched trowel (80% tile back coverage); use within 30-45mins
Press tiles with slight twist → adjust within 45mins; tap to remove air bubbles
Clean fresh adhesive with water; cure 72hrs for floor traffic, 14 days for wall protection
Key Warnings
• Do not use in critical water exposure areas (permanent wet zones)
• Protect from freezing in transit/storage; deliver 24hrs before construction
• Do not bridge expansion joints; fill with elastomeric sealant
• Do not use solvents on concrete substrates
Why Choose GoMix D1TE Tile Adhesive?
Superior performance characteristics that set our adhesive apart from standard solutions
Ultra High Bond Strength
Exceeds ANSI A136.1 Type 1, fits all heavy-duty interior tiling
Zero Slippage
No sag for vertical wall tiling, no tile falling risk
Multi-Substrate Compatibility
One adhesive for concrete, plywood, existing tiles, etc.
Low Temp Stability
Freeze/thaw-stable to -18°C, easy for global storage/transport
Long Working Time
45-50mins open time, sufficient for precise installation
Safe & Reliable
Nonflammable & nontoxic, safe for construction sites
GoMix specializes in high-performance tile adhesives with strict quality control and rich field experience.
Request a Quote for GoMix D1TE Tile Adhesive
Get professional pricing and technical support for your project requirements
All your information is strictly confidential and only used for inquiry reply.